Filament PET-G – a thermoplastic polymer from the group of polyesters in the form of fiber, used for 3D printing using the FFF method. Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1 kg of net material. It can be used in all FFF printers that are not protected from external suppliers and open source structures before using. PET-G is a material friendly for beginners, material available in covering and transparent colors.
Physical properties of the product:
Diameter of filament
|
1.75 mm / 2.85 mm |
| Dimensional tolerance of filament |
+/- 0.05 mm |
| Roundness of filament |
+/- 0.02 mm |
| Surface of the material |
High Gloss |
| Shrinkage of the material |
Very low |
| Product weight |
1.0 kg net, 1.36 kg gross |
| Spool – material |
Transparent policarbonate |
Suggested printing parameters:
| Specific Density |
220-250 °C |
| Heated bed |
70-80°C |
| Printing speed |
90mm/s. |
Physical properties of the material:
| Specific Density |
1.23 g/cm3 |
| Glass Transition Temperature |
80°C ASTM 3418 |
| Moisture |
≤ 0.3% |
Dimensions of the spool:
| Diameter |
200 mm |
| Width of spool |
~70 mm |
| Diameter of mounting hole |
52 mm |
